IPHONE
10-30-2008, 06:07 PM
With all this you will save your channel list and ALL the settings (LNB type, Freq, ETC)
How to save your channel list from the receiver
1. Insert USB
2. Press USB button on remote
3. Press FAV on remote
4. Say yes to download or upload data
(This will save a file with sdx extension in your USB, this is you channel list from the receiver)
Repeat this step on any receiver you want
How to load channel list to the computer with Channel Master
1. Download Channel Master from Channel Master ver. 1.20.03 (http://www.tvkeyzforums.com/downloads.php?do=file&id=967)
2. Install it
3. Open it (LOL)
4. On Channel Master Window click on File - Import - Wizard
5. Select CaptiveWorks and CW-600S/CW0-800S
6. Click Next until its done
To open another list Open again Channel Master WITHOUT closing the other one and repeat steps from step 4
How to add a channel to the list
1. Expand Satellites on left pannel
2. Expand the satellite of choice
3. Right click on transponder and select Add Channel
4. Fill out the info
How to copy channel from one list to another
1. Select channel of choice
2. Right click on it and Select Find Transponder. A list of tp's will apear on the left panel with the Transponder of the channel selected highlighted.
3. Write down the transponder or just be sure to remember it
4. Right click on the channel again on right panel and select Copy
5. Go to the other Channel list (destination)
6. On left panel expand the Satellite (i.e. 119.0° EC*O 7/ku)
7. Look for the Transpoder you wrote on step 3
8. Right click on it and select Paste. This will copy the channel to the channel list.
9. Now with the result list (all changes made)
10. Select (One Left click) (Highlight) "Satellites" on left panel. Go to Edit - Reorder Channels
11. Select Assign Station ID (SID) and Ignore Conflicting Channels
12. Go to File - Export - Wizard
13. Select CaptiveWorks and CW-600S/CW0-800S
14. And select a Path and a name for the file. A file with sdx extension will be created
How to move a channel from one transponder to another
1. Expand Sattelites on left panel
2. Expand the satellite you want to change
3. Select the transponder the channel is
4. Hold left click on the channel and drag it to the new transponder
How to load Channel list to the receiver
1. Copy the sdx file to a USB memory
2. Insert USB to receiver
3. Erase all channels from receiver
4. Go to USB menu
5. Select sdx file and press OK
6. Say yes to load data to receiver
Dont need to restart the receiver but wont harm it. So do it if your experience some troubles
How to save your channel list from the receiver
1. Insert USB
2. Press USB button on remote
3. Press FAV on remote
4. Say yes to download or upload data
(This will save a file with sdx extension in your USB, this is you channel list from the receiver)
Repeat this step on any receiver you want
How to load channel list to the computer with Channel Master
1. Download Channel Master from Channel Master ver. 1.20.03 (http://www.tvkeyzforums.com/downloads.php?do=file&id=967)
2. Install it
3. Open it (LOL)
4. On Channel Master Window click on File - Import - Wizard
5. Select CaptiveWorks and CW-600S/CW0-800S
6. Click Next until its done
To open another list Open again Channel Master WITHOUT closing the other one and repeat steps from step 4
How to add a channel to the list
1. Expand Satellites on left pannel
2. Expand the satellite of choice
3. Right click on transponder and select Add Channel
4. Fill out the info
How to copy channel from one list to another
1. Select channel of choice
2. Right click on it and Select Find Transponder. A list of tp's will apear on the left panel with the Transponder of the channel selected highlighted.
3. Write down the transponder or just be sure to remember it
4. Right click on the channel again on right panel and select Copy
5. Go to the other Channel list (destination)
6. On left panel expand the Satellite (i.e. 119.0° EC*O 7/ku)
7. Look for the Transpoder you wrote on step 3
8. Right click on it and select Paste. This will copy the channel to the channel list.
9. Now with the result list (all changes made)
10. Select (One Left click) (Highlight) "Satellites" on left panel. Go to Edit - Reorder Channels
11. Select Assign Station ID (SID) and Ignore Conflicting Channels
12. Go to File - Export - Wizard
13. Select CaptiveWorks and CW-600S/CW0-800S
14. And select a Path and a name for the file. A file with sdx extension will be created
How to move a channel from one transponder to another
1. Expand Sattelites on left panel
2. Expand the satellite you want to change
3. Select the transponder the channel is
4. Hold left click on the channel and drag it to the new transponder
How to load Channel list to the receiver
1. Copy the sdx file to a USB memory
2. Insert USB to receiver
3. Erase all channels from receiver
4. Go to USB menu
5. Select sdx file and press OK
6. Say yes to load data to receiver
Dont need to restart the receiver but wont harm it. So do it if your experience some troubles