IPHONE
09-29-2008, 11:42 AM
USB Instructions
Download and Unzip latest bin file.
Transfer unzipped file onto USB stick then plug it into the box.
You should see a message that says USB ready. Now press the USB button
on remote and then scroll to the right to open the Software tab.
Look for new file and press OK to load it. After it loads, it will ask you if you want to reboot, say YES.
When it reboots then go in menu and do a Factory Default. when it says save data (no)
Then reboot again from the rear power switch. When it comes back up again,
now you can setup satellites and options.
[/quote]do this first and do this exactly or the box wont work...
you need to go into you sat name....what ever sat you r tyring to point at...make shore your Q bar says sat found:_______?and that has to be the same as your sat name...here a couple of pics so you can figer it out
http://img144.imageshack.us/img144/2643/picture052zt9.jpg
http://img144.imageshack.us/img144/6637/picture053lt1.jpg
http://img144.imageshack.us/img144/7820/picture054pk4.jpg
http://img153.imageshack.us/img153/3595/picture055aj1.jpg
scan channels.......
After that is done, exit out of all menus and with the remote press F1 000 to enable the Patch.You should see a message on your tv that will say PATCH ENABLED. keys will roll....wait it will come on.....enjoy http://www.crazyfta.net/forums/images/misc/progress.gif
Download and Unzip latest bin file.
Transfer unzipped file onto USB stick then plug it into the box.
You should see a message that says USB ready. Now press the USB button
on remote and then scroll to the right to open the Software tab.
Look for new file and press OK to load it. After it loads, it will ask you if you want to reboot, say YES.
When it reboots then go in menu and do a Factory Default. when it says save data (no)
Then reboot again from the rear power switch. When it comes back up again,
now you can setup satellites and options.
[/quote]do this first and do this exactly or the box wont work...
you need to go into you sat name....what ever sat you r tyring to point at...make shore your Q bar says sat found:_______?and that has to be the same as your sat name...here a couple of pics so you can figer it out
http://img144.imageshack.us/img144/2643/picture052zt9.jpg
http://img144.imageshack.us/img144/6637/picture053lt1.jpg
http://img144.imageshack.us/img144/7820/picture054pk4.jpg
http://img153.imageshack.us/img153/3595/picture055aj1.jpg
scan channels.......
After that is done, exit out of all menus and with the remote press F1 000 to enable the Patch.You should see a message on your tv that will say PATCH ENABLED. keys will roll....wait it will come on.....enjoy http://www.crazyfta.net/forums/images/misc/progress.gif