IPHONE
09-29-2008, 12:32 PM
How to Properly Load a Coolsat 7000 with a USB Flash Drive
NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !
1) Download and unzip both the (Coolsat_7000_Fac_V1003) bin and NorW latest release
(Coolsat7000NorW_V0109)
NOTE: ALL NorW bins and or Factory bins Must NOT be in a Zip file or any other file when put onto your flash drive !
2) Put your flash drive in the USB port on your computer right click on both files and then
select (Send To) on the dropdown list. Select (removable Disk) and click on it. The files should now be on your coolsat flash drive
3) With your receiver already turned on plug your coolsat flash drive into the USB port on the back of your coolsat 7000 receiver.
4) The software Update screen will pop up on your TV. with your remote select the Coolsat_7000_Fac_V1003 file then click the RED button above the UP button on your remote.
and then the OK button.
When it is finished loading your receiver will reboot.
5) AFTER it reboots Remove your USB Flash Drive and click Menu on your remote and then go to Installation screen and select FACTORY SETTING and say YES to (Reset all settings) when the factory reset is finished set the Language of choice and then set your time zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say NO at this time !
6)When your receiver reboots itself Put your USB Flash drive back in your receiver and Repeat the First 5 steps to load the Coolsat7000_NorW-V0109 bin !
5b) BUT this time say YES to Auto Detect and it will auto set your LNB type and switch settings and then scan All the satellites your pointed at !
NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !
1) Download and unzip both the (Coolsat_7000_Fac_V1003) bin and NorW latest release
(Coolsat7000NorW_V0109)
NOTE: ALL NorW bins and or Factory bins Must NOT be in a Zip file or any other file when put onto your flash drive !
2) Put your flash drive in the USB port on your computer right click on both files and then
select (Send To) on the dropdown list. Select (removable Disk) and click on it. The files should now be on your coolsat flash drive
3) With your receiver already turned on plug your coolsat flash drive into the USB port on the back of your coolsat 7000 receiver.
4) The software Update screen will pop up on your TV. with your remote select the Coolsat_7000_Fac_V1003 file then click the RED button above the UP button on your remote.
and then the OK button.
When it is finished loading your receiver will reboot.
5) AFTER it reboots Remove your USB Flash Drive and click Menu on your remote and then go to Installation screen and select FACTORY SETTING and say YES to (Reset all settings) when the factory reset is finished set the Language of choice and then set your time zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say NO at this time !
6)When your receiver reboots itself Put your USB Flash drive back in your receiver and Repeat the First 5 steps to load the Coolsat7000_NorW-V0109 bin !
5b) BUT this time say YES to Auto Detect and it will auto set your LNB type and switch settings and then scan All the satellites your pointed at !