IPHONE
09-29-2008, 12:33 PM
How to setup Coolsat 7000 PVR
Program your Coolsat 7000 PVR with the USB Stick:
1 - You need to format Memory stick. Using FAT32 to format it, not NTFS.
2 - Turn on your unit first then insert the USB stick
3 - Now you will see The Software Upgrade message.
4 - Hit the Red button on the left with the Bookmark icon on the remote control to program it
How to setup your dish setting:
1 - Press Menu on the remote control
2 - Installation
3 - Highlight Dish Setting then Hit OK button
4 - Now it'll bring up the Sats list, you need to adjust LNB type, Frequency, DiseqC switch... to match
with all your hardwares
How to scan the channels:
There are two ways to do it:
1 - while you are at Dish Setting, highlight Channel Search then press OK.
1a - hit OK on Search Mode. Pick which one you want to use Auto, Manual, Blind,Adv
1b - Highlight Start Search then Press OK. Beginning to scan...
2 - Menu Installation Channel Search. After this, follow step 1a & 1b.
How to Renumbering your Local Channels:
1 - Menu Installation
2 - Highlight Option then hit OK on the remote
3 - Hit Ok on Renumbering Local CH
4 - Pick your State & your City
How to edit your Channel List:
1 – Menu Channel List
2 – Channel List Manager hit OK on The Remote
3 - It will bring up the Edit Mode. Now you just need to Select the one you want to use
How to Record and Playback:
1 - Hit Record Button, it’ll start recording. Hit the Record Button again, now you can able to adjust
the recording time up to two hours. Remember, you can stop it at any time you want to, You don’t have
to wait unit it ends.
2 - Hit Play Button on the remote control to playback your recording show.
Program your Coolsat 7000 PVR with the USB Stick:
1 - You need to format Memory stick. Using FAT32 to format it, not NTFS.
2 - Turn on your unit first then insert the USB stick
3 - Now you will see The Software Upgrade message.
4 - Hit the Red button on the left with the Bookmark icon on the remote control to program it
How to setup your dish setting:
1 - Press Menu on the remote control
2 - Installation
3 - Highlight Dish Setting then Hit OK button
4 - Now it'll bring up the Sats list, you need to adjust LNB type, Frequency, DiseqC switch... to match
with all your hardwares
How to scan the channels:
There are two ways to do it:
1 - while you are at Dish Setting, highlight Channel Search then press OK.
1a - hit OK on Search Mode. Pick which one you want to use Auto, Manual, Blind,Adv
1b - Highlight Start Search then Press OK. Beginning to scan...
2 - Menu Installation Channel Search. After this, follow step 1a & 1b.
How to Renumbering your Local Channels:
1 - Menu Installation
2 - Highlight Option then hit OK on the remote
3 - Hit Ok on Renumbering Local CH
4 - Pick your State & your City
How to edit your Channel List:
1 – Menu Channel List
2 – Channel List Manager hit OK on The Remote
3 - It will bring up the Edit Mode. Now you just need to Select the one you want to use
How to Record and Playback:
1 - Hit Record Button, it’ll start recording. Hit the Record Button again, now you can able to adjust
the recording time up to two hours. Remember, you can stop it at any time you want to, You don’t have
to wait unit it ends.
2 - Hit Play Button on the remote control to playback your recording show.