Loading Softcam/Bin with USB Stick on CNX V1

[TROOPER]

Not my work but here it is
CNX V-1 USB Key Loading with CNX bins 4.12 and higher

Note: Bin 4.12 and higher is required to load the keys by USB

To load keys... via USB

Unzip and Copy the softcam.key to the main, or root directory of the USB drive. It must go there!! It cannot go into a sub-directory - if you use those on the USB device.

Unzip and copy the CNX V-1 bin 4.12 file, or higher, to the USB drive. Unlike the Softcam.key file, it may be copied to any directory on the USB device, as the CNX V-1 will allow you to navigate directories for bin files.

STB process:

Turn on CNX V-1
USB Load bin 4.12 or higher
Let it finish and wait for re-boot
Once on a channel, press Menu on the RCU
Press 9999 (4 nines)
CAS menu will appear
Navigate to Key Manager
Press Ok
Press Green button on RCU
Wait for meessage box to appear and show.. Completed!! (about 2-3 seconds)
Press OK
Press Exit, 3 times, to picture

Watch TV


PS... If need be, you can make your own key file in Notepad by means of a simple copy and paste of current keys... use the example below as a guide or edit a softcam.key file and save the new one into another directory, or it will overwrite the original.

I made this one myself... but have taken out the keys, as they will change by the time you read this

You must save the file as "softcam.key"

Note: there are no spaces between the key codes.


Code:
; softcam.key - internal code for CNX V-1
;================================================= ===================
;
N 0901 00 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ; Bev 86
N 0901 01 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ; Bev 96
N 0101 00 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ; DN 86
N 0101 01 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ; DN 96