IPHONE
07-29-2008, 07:31 PM
How to flash Captiveworks 800s PVR &700s with USB
1 - Download/Unzip files. transfer files onto USB stick then plug it into the box. You should see a message that says
USB ready
2 - Now press the USB button on remote, highlight the files that you want to use, hit OK to load it. Now you will
see this message “Do you want to update software/database?” Hit “YES”
3 – After it’s done, it will ask you “Do you want to reboot your receiver?” Hit “YES”
How to setup your dish setting and Scan
1 – Menu, Installation, Antenna setting
2 – Select your Satellites
3 – Change your LNB type, Diseqc Switch to match with all your hardwares
4 – On the bottom screen, there are four options: Auto, Network, Blindscan and Transponder scan. Select one of
these option to scan it.
Final Step before you enjoy your new receiver:
After it's done with all the scanning, press Exit out of the Menu. Now Press F1 000 on the remote control to enable
patch. You should see message on TV that say PATCH ENABLED. Now just wait for the keys to roll and watch TV.
That’s it and enjoy your new receiver.
1 - Download/Unzip files. transfer files onto USB stick then plug it into the box. You should see a message that says
USB ready
2 - Now press the USB button on remote, highlight the files that you want to use, hit OK to load it. Now you will
see this message “Do you want to update software/database?” Hit “YES”
3 – After it’s done, it will ask you “Do you want to reboot your receiver?” Hit “YES”
How to setup your dish setting and Scan
1 – Menu, Installation, Antenna setting
2 – Select your Satellites
3 – Change your LNB type, Diseqc Switch to match with all your hardwares
4 – On the bottom screen, there are four options: Auto, Network, Blindscan and Transponder scan. Select one of
these option to scan it.
Final Step before you enjoy your new receiver:
After it's done with all the scanning, press Exit out of the Menu. Now Press F1 000 on the remote control to enable
patch. You should see message on TV that say PATCH ENABLED. Now just wait for the keys to roll and watch TV.
That’s it and enjoy your new receiver.