silly87
10-02-2008, 09:43 PM
Dongle bootloader via serial cable
1) Uplug the power on your dongle connect it to the PC with serial cable
2) Open the new loader
3) Setup Comm Port
4) Click on Upgrade Software on the loader
5) choose A125_up bin file
6) wait 10 seconds and plug in the power on the dongle
7) You will see the Loading bar start to move
very important do not touch anything until the dongle reboots itself
1) Uplug the power on your dongle connect it to the PC with serial cable
2) Open the new loader
3) Setup Comm Port
4) Click on Upgrade Software on the loader
5) choose A125_up bin file
6) wait 10 seconds and plug in the power on the dongle
7) You will see the Loading bar start to move
very important do not touch anything until the dongle reboots itself