seansterx
10-01-2008, 06:20 PM
Here is what you need to do:
1. Hook up your receiver to your pc with the null cable
2. Right click on my Computer (click on properties)
3. Click Device Manager find Ports(Com&LPT)
4. Righ click on the Usb to Serial Cable and go to Properties
5. You will see 4 options(General, Port Settings, Driver, Details)
change (Bits per secon) to 115200
6. Click "Advanced"
Make sure you there is a check mark on(Use FIFO buffers)
Move both Reveiver Buffer and Transmit Buffer to "High"
7. On "COM Port Number" Pick any COM1 to COM4 whichever is availible
and "not in use"
8. Click Ok after that.. and exit out.
9. Now make sure your Gtrom loader Com match the one you selected(com1-com4)
1. Hook up your receiver to your pc with the null cable
2. Right click on my Computer (click on properties)
3. Click Device Manager find Ports(Com&LPT)
4. Righ click on the Usb to Serial Cable and go to Properties
5. You will see 4 options(General, Port Settings, Driver, Details)
change (Bits per secon) to 115200
6. Click "Advanced"
Make sure you there is a check mark on(Use FIFO buffers)
Move both Reveiver Buffer and Transmit Buffer to "High"
7. On "COM Port Number" Pick any COM1 to COM4 whichever is availible
and "not in use"
8. Click Ok after that.. and exit out.
9. Now make sure your Gtrom loader Com match the one you selected(com1-com4)