pzal123
12-26-2008, 12:44 AM
Steps For Using Homesat Loader
1. Download the Homesat loader software which can be obtained from where you got the sgn file and unzip/untar it.
2. Hook up the cable to the serial port of the computer and the Homesat box
3. Turn the Homesat box OFF using the switch in the back.
4. Launch the software and choose “download”
5. Select the sgn file (you may have to change the file type to see it)
6. Choose Start
7. Wait 5 seconds, then turn the power switch to ON
8. Wait for it to download.
9. Look at the display on the Homesat to see when it is done. Don’t base it off the computer.
10. When it is done, you may need to reset the language and time again.
1. Download the Homesat loader software which can be obtained from where you got the sgn file and unzip/untar it.
2. Hook up the cable to the serial port of the computer and the Homesat box
3. Turn the Homesat box OFF using the switch in the back.
4. Launch the software and choose “download”
5. Select the sgn file (you may have to change the file type to see it)
6. Choose Start
7. Wait 5 seconds, then turn the power switch to ON
8. Wait for it to download.
9. Look at the display on the Homesat to see when it is done. Don’t base it off the computer.
10. When it is done, you may need to reset the language and time again.