PDA

View Full Version : Homesat Specs.


brutus36
02-22-2009, 10:07 PM
http://i39.tinypic.com/9kbb0w.gif

Technical Specifications

I Tuner & Demodulator
Parameter Specifications
Input Frequency Range 950MHz to 2150 Mhz
RF Input Signal Level -25 to -65dBm
RF Impedance 75
IF Bandwidth 55MHz/8MHz(Under 5Msps)
LNB Power 13/18DC, 14/19V +/-5%, 0.5Amax, 0.8Apeak overload protected
LNB Tone Switch 22kHz +/-2kHz, 0.6Vpp +/-0.2V
DiSEqC Control Version 1.2, Tone burst A/B
Demodulation QPSK
Symbol Rate 1~45Msps/SCPC, MCPC



I MPEG
Parameter Specifications
Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Specification
Input Rate Max.15Mbit/s
Video MPEG-2 MP@ML
Audio MPEG-1/2 Audio Layer 1,2
Aspect Ratio 4:3, 16:9
Video Resolution 720x576(PAL), 720x480(NTSC)
Audio Mode Stereo, Dual channel, Joint stereo, Mono
Audio Sampling Frequency 32/44.1/48kHz



I Connector
Parameter Specifications
LNB IF input F type, IEC 169-24 Female
LNB IF Loop-through Output F type, IEC 169-24 Female
S-VHS Y, C
RCA Stereo,CVBS
Component Y,Pb,Pr
SPDIF Fiber-Optic connection(Digital Audio Output)
Serial Port RS232C D-sub male type



I RF-modulator
Parameter Specifications
RF-Connector 75 IEC169-24, Male/Female
Output Channel CH 3-4 for the Demodulator



I Power Supply
Parameter Specifications
Input Voltage 90~260VAC(SMPS)
Power Consumption Max. 25W
Weight Appr. 1.5KG
Operating Temperature 0'C~40'C
Storage Temperature -40'C~65'C





> New Features


Zoom mode 1. Press the button to enlarge the screen.

2. You can move the focus using the / / /
Up/Down/Left/Right button.

3. Press the EXIT button to exit this mode.
. Zoom mode supports the function of enlarging screen. (X2, x3, x4, x5, x6).
Multi Picture 1. Select the Multi Picture mode on the function bar.

2. You can select the desired channel using the
/ / / Up/Down/Left/Right button.

3. Press the EXIT button to watch the channel with full size.
.Multi Picture : supports 4, 9, 10, 13, 16 partition.
.You can move the cursor to where you want to watch in Muti Screen mode.

Radio Equalizer 1. Radio Equalizer will be displayed automatically on the Radio mode.

2. Radio Equalizer will not disappear during the Radio mode.



* Fast Channel Change
Powerful Main Processor makes fast channel change. Less than 1 sec. for channel change.
* Fast Channel Scanning more than BlindScan
1 minute is enough to scan all channels.
* Powerful Main Chip Processor
Zoran Processor 170 Mips , 130 MHZ Processing.
* Fiber Optic Audio Output
Digital Audio Sound
* Component Digital Video Outputs
Y/Pb/Pr Digital Video Outputs for Digital Channels.
* Power Switch
Easy to turn on / off in order to be cost effective