TROOPER
09-15-2009, 11:09 PM
c/p
Instructions
1. Upgrade the nano2 with latest NPB NPN file for the Nano II
2. After the upgrade goto Menu -> Accessory ->RS-232 Mode and select Type to Normal.
3. Connect the ethernet adapter to RS-232 Port.
4. Connect the Lan line to the ethernet adapter.
5. Go to Menu Installations -> Network ->set Networking Setting to Auto.
6. It should automatically bring up your IP information then press apply.
7. When it has been set up correctly go to Bev/DN N3 Channel and the dongle will try to connect to the server. Press OK
Instructions
1. Upgrade the nano2 with latest NPB NPN file for the Nano II
2. After the upgrade goto Menu -> Accessory ->RS-232 Mode and select Type to Normal.
3. Connect the ethernet adapter to RS-232 Port.
4. Connect the Lan line to the ethernet adapter.
5. Go to Menu Installations -> Network ->set Networking Setting to Auto.
6. It should automatically bring up your IP information then press apply.
7. When it has been set up correctly go to Bev/DN N3 Channel and the dongle will try to connect to the server. Press OK