TROOPER
11-04-2009, 01:36 AM
Anik3 118.8 Settings:
Lnb frequency: 10750
Type : ocs-dp
your appropriate disec setting: ex. dish 1000 plus (choose Port 4)
Delete all TP on sat 118.7 except 11715 v ( Recommended not to delete any TP , just add following TP):
Than add following tp's:
11744 v 20000
11958 v 20000
11988 v 20000
12049 v 20000
12079 v 20000
12109 v 20000
12141 v 20000
12445 v 20000
12475 v 20000
12501 v 20000
12537 v 20000
12567 v 20000
12597 v 20000
12811 v 20000
12872 v 20000
Once complete:
Go to channel search press ok then down to start search and press ok, when complete you should have all international channels if your dish is set correctly and signal strength is good.
This is because your lnbf doesn't have Horizontal but only Verticals
To get the Dish Pro conversion you simply take the target TP (12033) and subtract it from 24600
24600 - 12033 = 12567
I think I have listed all tp but if missing any here is the link to look up channels and their target TPhttp://www.lyngsat.com/packages/dish119.html
Lnb frequency: 10750
Type : ocs-dp
your appropriate disec setting: ex. dish 1000 plus (choose Port 4)
Delete all TP on sat 118.7 except 11715 v ( Recommended not to delete any TP , just add following TP):
Than add following tp's:
11744 v 20000
11958 v 20000
11988 v 20000
12049 v 20000
12079 v 20000
12109 v 20000
12141 v 20000
12445 v 20000
12475 v 20000
12501 v 20000
12537 v 20000
12567 v 20000
12597 v 20000
12811 v 20000
12872 v 20000
Once complete:
Go to channel search press ok then down to start search and press ok, when complete you should have all international channels if your dish is set correctly and signal strength is good.
This is because your lnbf doesn't have Horizontal but only Verticals
To get the Dish Pro conversion you simply take the target TP (12033) and subtract it from 24600
24600 - 12033 = 12567
I think I have listed all tp but if missing any here is the link to look up channels and their target TPhttp://www.lyngsat.com/packages/dish119.html