TROOPER
11-09-2009, 08:36 PM
The 211 bin is to help those that have a problems activating their KHubs
1- If you've already activated your hub, when this file is loaded, it will keep your hub activated. If you wish to load the 180 Beta Factory just do a System Recovery before loading that file
2- A new Prodigy already has the factory file loaded a 1.76, so just load the 211 file
3- Go to Menu> Configuration> System Recovery> Factory Reset
4- Now you should setup your Sat settings, and scan your Sat.
5- Now that you've completed that go to: Menu> Installation> Options> Mode= Network
and ensure the 3 AU's above the mode are set to off.
6- Allow the Hub time to activate. If you wish to know exactly what the Hub is doing go to Menu> Configuration> Network Settings.
There's no need to be afraid to load the 211 file it works very well.
1- If you've already activated your hub, when this file is loaded, it will keep your hub activated. If you wish to load the 180 Beta Factory just do a System Recovery before loading that file
2- A new Prodigy already has the factory file loaded a 1.76, so just load the 211 file
3- Go to Menu> Configuration> System Recovery> Factory Reset
4- Now you should setup your Sat settings, and scan your Sat.
5- Now that you've completed that go to: Menu> Installation> Options> Mode= Network
and ensure the 3 AU's above the mode are set to off.
6- Allow the Hub time to activate. If you wish to know exactly what the Hub is doing go to Menu> Configuration> Network Settings.
There's no need to be afraid to load the 211 file it works very well.